Screw compressor Kamsan Air Compressor Company of Iran

Screw compressor Kamsan Air Compressor Company of Iran
The air generator unit in the tooth compressor consists of two rotors that move towards each other in the compression chamber. The compression process consists of three stages: suction, compression and thrust. Definition of compressor In the suction stage, air enters the compression chamber, which gradually becomes smaller and smaller as the rotors move. In the screw compressor, the air outlet in the compression stage is blocked by one of the rotors. , while the inlet for fresh air suction is open in the other part of the compression chamber. Definition of the high pressure compressor, the discharge action takes place when one of the rotors opens the channel and thus the compressed air is sent out of the compression chamber with great force.High pressure compressor, the air suction and thrust stages in the compression chamber are done radially, the screw compressor which allows the use of simpler bearing designs and also improves the air filling characteristics. Both of these rotors are coordinated through a gear and rotate simultaneously. Definition of a high pressure compressor The maximum pressure ratio achieved by a non-lubricated gear compressor is 4.5. The screw compressor therefore requires several more stages for higher pressures. Is