Procedures for setting up a 1000-liter compressor with a standing (vertical) tank (first part)

To start the 1000 liter compressor with a standing tank, you must first place the chassis of the 1000 liter compressor and the tank on a completely level surface. Also, the oil level in the standing 1000 liter compressor air conditioner should be checked. This is the most important step and should never be forgotten. Because the oil level should be half full. The lack of oil causes the internal surface of the cylinder to not be lubricated well. As a result, the pistons are locked inside the cylinder and cause the connecting rods to break and damage the inside surface of the cylinder as well as the compressor crank. You should be careful not to pour oil more than the specified limit because in this case the oil will overflow from the compressor and sometimes it will cause pressure to the engine. At this stage, the air conditioner of the compressor should be connected to the 1000 liter tank. To transfer the air produced by the compressor cylinder into the tank, we connect the air transfer hose from one side to the air outlet of the compressor and from the other side to the one-way valve installed on the tank.