Compressor

Gear compressor | Kamsan Air Compressor Company of Iran

Gear compressor | Kamsan Air Compressor Company of Iran
The air generator unit in the tooth compressor consists of two rotors that move towards each other in the compression chamber. The compression process consists of three stages: suction, compression and thrust. In the suction phase, air enters the compression chamber, which becomes smaller and smaller as the rotors move. The air outlet in the compression stage is blocked by one of the rotors, while the inlet for fresh air suction is open in the other part of the compression chamber. The discharge action takes place when one of the rotors opens the channel and thus the compressed air is sent out of the compression chamber with great force. The air suction and thrust stages in the compression chamber are radial, which makes it possible to use simpler bearing designs and also improves the air filling characteristics. Both these rotors are coordinated through a gear and rotate simultaneously. The maximum pressure ratio obtained by the non-lubricated gear compressor is 4.5.The gear compressor therefore requires several more stages for higher pressures.