Axial compressor | Kamsan Air Compressor Company of Iran
Axial compressor Kamsan Air Compressor Company of Iran is an axial compressor (Axial compressors) with an axial flow, air or gas passes through rows of fixed and moving vanes along the rotating axis of the compressor. Axial compressor thus the air speed gradually increases at the same time as the fixed vanes kinetic energy. are converted into pressure, it increases. The lowest volumetric flow rate in such a compressor is about 15/s. Usually, a balancing cylinder is installed in the compressor, to balance the axial pressure force. Axial compressors are generally smaller than centrifugal compressors, and typically their speed is 25% higher, and these compressors are used for high volumetric flow rates at relatively moderate pressures.A-1) Formation of an economic enterprise. Of course, from that year to the date of official establishment as a company (1359 Shamsi), it has not been included in the organizational experience of this company. In those years, the activity was based on the repair of compressors that were completely imported from abroad. It should be mentioned that the activity was based on the servicing of industrial machines, which experience and knowledge is due to the presence of a person (management) who studied at the Technical University of France. And the contract was signed with Jeep, Iran National and National Shoes.A-2) Production On November 23, 1359, this company was officially registered and after obtaining a production license, it started producing all kinds of reciprocating oil-type compressed air compressors. Production compressors by agreement with German KASER company, with the design and presence of German experts of the said company, all manufacturing operations such as casting, turning and assembly started in an area of more than 1500 square meters. Relying on the quality of the product and the very low price compared to the foreign equivalents, this product has been well received and laid the groundwork for this company’s ascent to the heights of progress.Axial compressor, with the exception of gas turbine applications, the pressure ratio is rarely higher than 6. The typical current is approximately 65/s and the effective pressure is approximately 14 bar.
