Pressure Vessels
Pressure Vessels
Internal and External Surface Specifications
Internal Surface: After sandblasting, the internal surface of the tank is coated in two stages with two layers of epoxy paint, with a total thickness of 120 microns.
External Surface: After sandblasting, the external surface of the tank is coated in two stages with two layers of industrial paint, also with a total thickness of 120 microns.
If the environmental conditions at the tank installation site involve high humidity, the external surface will be painted using the same method as the internal surface.
Technical specifications of the tank
- Manufactured according to ASME Sec. VIII Div. 1 Standard
- Equipped with a Pressure Gauge
- Includes Additional Fittings for Special Applications
- Equipped with a Special Hook for Handling
- Includes a Manhole Suitable for the Tank’s Capacity
- Fitted with a Safety Valve and Drain Valve
| Technical Data | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| PL.Thick (mm) | CAPTHICK (mm) | Dimensions | Capacity (Lit) | Model | ||||||
| R (inch) | H (mm) | G (inch) | F (inch) | E (inch) | D (mm) | A (mm) | ||||
| 6 | 6 | 1/2″ | 2000 | 1/2″ | 1/2″ | G1 | 600 | 1500 | 500 | KAR 500 |
| 6 | 6 | 1/2″ | 2000 | 1/2″ | 1/2″ | G11/4 | 840 | 1500 | 1000 | KAR 1000 |
| 8 | 8 | 1/2″ | 2680 | 1/2″ | 1/2″ | G11/2 | 900 | 2160 | 1500 | KAR 1500 |
| 8 | 8 | 1/2″ | 2100 | 1/2″ | 1/2″ | G2 | 1200 | 1500 | 2000 | KAR 2000 |
| 10 | 10 | 1/2″ | 3020 | 1/2″ | 3/4″ | G2 | 1200 | 2400 | 3000 | KAR 3000 |
| 10 | 10 | 1/2″ | 3620 | 1/2″ | 3/4″ | F3 | 1400 | 3000 | 5000 | KAR 5000 |
| 12 | 12 | 1/2″ | 5700 | 1/2″ | 3/4″ | F4 | 1420 | 5000 | 8000 | KAR 8000 |
| 12 | 12 | 1/2″ | 7000 | 1/2″ | 1″ | F4 | 1500 | 6000 | 10000 | KAR 10000 |
Manufacturing of tanks with higher capacity and pressure is carried out upon request. (The manufacturer reserves the right to make changes in design and products.)
Tank Inspection Procedures and Related Reports
In-process inspection by the Q.C. department
Application of the highest corrosion allowance in sheet thickness calculations
Submission of valid drawings, calculations, and documentation including PQR and WPS
Radiographic and hydrostatic testing of tanks with technical documentation and reports
Tank welding performed with special electrodes by certified welders, with technical documents and reports provided
Use of the highest quality plates made of SA516 GR70 or 17MN4 steel from Mobarakeh Steel Company, with supporting technical documents and reports
