AIR RECEIVERS

Manufactured according to standard ASME sec. 8 div. 1

Having a manhde proportionate to the capacity of the receiver Equipped with safety valve.autodrain valve and monometer. Features of intimal and external surfaces.

After sandblasting, the internal surface of the receiver is covered in two stages with two layers of epoxy coat with a thickness of 120 u.

After sandblasting, the external surface of the receiver is covered in two stages with two layers of industrial paint with a thichness of 100 u.

When the ambient atmosphere in the location where the receiver has been installed is too humid, the external surface as the internal surface.

Stages of inspection and related reports

Inspection during manufacturing by the QC section

Certificate of hydraulic test

Presenting calculation book

Radiography report
Technical Data
PL.THICK
(mm)
CAPTHICK
(mm)
DIMENSIONS CAPACITY
(Lit)
MODEL
R
(inch)
H
(mm)
G
(inch)
F
(inch)
E
(inch)
D
(mm)
A
(mm)
6 6 1/2 2000 1/2 1/2 G1 600 1500 500 KAR 500
6 6 1/2 2000 1/2 1/2 G11/4 840 1500 1000 KAR 1000
8 8 1/2 2680 1/2 1/2 G11/2 900 2160 1500 KAR 1500
8 8 1/2 2100 1/2 1/2 G2 1200 1500 2000 KAR 2000
10 10 1/2 3020 1/2 3/4 G2 1200 2400 3000 KAR 3000
10 10 1/2 3620 1/2 3/4 F3 1400 3000 5000 KAR 5000
12 12 1/2 5700 1/2 3/4 F4 1420 5000 8000 KAR 8000
12 12 1/2 7000 1/2 1 F4 1500 6000 10000 KAR 10000

LOGO11

error: Content is protected !!